Training Panel Function Of Gas Heater

Product Description

Training Panel Function of Gas Heater

Technical Description of Training Panel Function of Gas Heater

The Training Panel Function of Gas Heater is used to illustrate the functioning of a gas combination boiler. The main components of the gas boiler are clearly arranged on a panel to allow better understanding. A process schematic also illustrates the function.  A plate heat exchanger is used to simulate a radiator. Cold water is fed through the heat exchanger as a heating load. A viewing window allows observation of the gas flame in the burner. Built-in thermometers and flow meters allow the recording of measured values to determine the power and efficiency. The unit is operated with liquid gas (propane) and is therefore independent of any pre-installed natural gas lines.

Specification of Training Panel Function of Gas Heater

• Familiarisation with a typical combination boiler
• Main components clearly mounted on panel
• Burner with viewing window for observation of flame
• Plate heat exchanger simulates radiator, cold water used as heating load
• Additional instrumentation for energy balances: thermometers, flow meters, manometers
• Operation with propane gas

 Technical Data of Training Panel Function of Gas Heater

Gas boiler

• Nominal heating capacity range: 8.9...18kW
• Standard utilisation rate at nominal load: 93%
• Feed flow temperature: 82...87°C
• Hot water temperature: 30...65°C
• Permissible excess operating pressure

a.       Heater: 3bar

• Exhaust gas temperature: 90...125°C
• Exhaust gas temperature: 90...125°C

Expansion vessel

• Capacity: 2L
• Admission pressure: 0.5bar

Dimensions and Weight of Training Panel Function of Gas Heater

• l x w x h: 1650 x 1200 x 350 mm
• Weight: approx. 110 kg