Belt Drive Kit

Product Description

Belt Drive Kit Technical Description of Belt Drive Kit When properly designed, manufactured, and correctly set; belt drives are low-maintenance, low-noise, long-life drive units. It is important that the belt should not vibrate and/or slip. The accessory set-up can be used to investigate conditions that cause vibration or slip. The effect of disparate elongation on multiple belt drives can be demonstrated by means of individually-adjustable tensioning rollers. The belt drive is a dual belt drive with a belt tensioner. It can, however, also be operated with only one belt. An eccentrically-bored small belt pulley and a damaged V-belt enhance the range of possible experiments. The brake and load unit is required to conduct the experiment. The accessory set can also be used to apply transverse loads in other experiments. Specification of Belt Drive Kit Investigation of the vibrations of belt drivesDual belt drive with V-beltBelt drive can be operated with one beltIndividually-adjustable tensioning rollersBelt drive with eccentricityDamaged V-beltBelt pre-tension measuring device 0...150NSuitable for applying transverse loads on other systems within the accessory sets of the seriesStackable box for all components Technical Data of Belt Drive Kit V-belt pulleys Large: D=125mmSmall: D=63mmSmall, eccentric: D=63mmAxle centres: 300mm V-belt SPZ, approx. 10mm wideBelt length: 912mm Dimensions and Weight of Belt Drive Kit l x w x h: 600x400x170mm (box)Weight: approx. 6kg