Rudder Measuring Instrument

Rudder Measuring Instrument

Product Details:

X

Product Description

Rudder Measuring Instrument

Measurements can also be taken with the ship model manoeuvring, while the rudder to be tested is adjusted to various rudder angles. Balance rudders as well as rudders supported on a helm post can be tested with the instrument. In the latter case, lift and resistances are measured for the combination of rudder and helm post while torque is measured at the rudder only.

Specification of Rudder Measuring Instrument

  1. Rated load for forces in longitudinal and transverse direction (resistance and list): ±60 N
  2. Rated torque: 1.5 ±Nm
  3. Rated load for forces in longitudinal and transverse direction (resistance and list): ±100 N
  4. Rated torque: ±4 Nm
  5. Rated load for forces in longitudinal and transverse direction (resistance and list): ± 200 N
  6. Rated torque: ±14 Nm
  7. Electric angle measurement: ±45
  8. Weight of the rudder measuring instrument, inclusive connection plugs, however without cables: about 8 kg
  9. Possibility to adjust the rudder angle via coupling rods connected to a suitable steering machine which is not included in the supply of an instrument -1: ±45°
  10. Manual angle adjustment according to scale (full rotation): ±180°
  11. Permitted overload inclusive dynamic peaks for forces in longitudinal and transverse direction with a distance of the point of impact of 400mm (600mm) from the lower edge of the base plate: 50% (25%)
  12. Permitted overload for torque inclusive dynamic peaks: 50%


DIDAC INTERNATIONAL

* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



DIDAC INTERNATIONAL All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.