Pipe Friction Training Panel

Product Description

Pipe Friction Training Panel       

Technical Description of Pipe Friction Training Panel

Four different pipe sections are fitted to a panel. Each section can be individually selected using ball valves. The measuring points are 1m apart. To keep measuring inaccuracies as low as possible, the pressure is measured using annular chambers. The trainer is supplied from the water mains. The flow rate is adjusted using valves and measured using a rotameter. The pressure drop over a pipe section is measured using a digital, battery-operated differential manometer.

Specification of Pipe Friction Training Pane

• Investigations on pipes
• 4 Pipe section of the same lengths and different materials as measured objects
• Pipe sections can be selected via ball valves
• Flow rate can be adjusted via valves
• Pressure measurement with annular chambers
• Pressure measurement with digital differential pressure manometer, battery-operated
• Flow rate measurement using rotameter
• Water connections made using quick-release couplings

Technical Data of Pipe Friction Training Pane

Pipe sections: measured length: 1000mm

• Pipe section 1: acrylic 20x1.5mm
• Pipe section 2: steel 1/2"
• Pipe section 3: copper 18x1mm
• Pipe section 4: copper 15x1mm

Differential pressure manometer with bleeder

• Supply: 9V, battery-powered

Measuring ranges

• Flow rate: 150...1600L/h
• Pressure: 0...1000mbar

Dimensions and Weight of Pipe Friction Training Pane

• l x w x h: 1650x700x1850mm
• Weight: approx. 92kg