PID Controller

Product Description

PID Controller

Standard industrial controller that can be used as P, PI, PD or PID controller in the closed loop automatic control systems.

Technical features of PID Controller

1. Powersupply: +15 V ; 0 V ; 15 V
2. Input summing node for two different reference variables
3. UR and UC and for one controlled variable UA.
4. Signal voltage range: 10V .... +10V
5. Parameters of the controller continuously adjustable
6. Proportional gain: Kp = 0 ... 1000
7. Time of the integral action: TI = 1ms ... 100s
8. Time of the derivative action: TD = 0.2ms ... 20s
9. Reset input of the integral controller.
10. Output summing node to add or subtract noise variables.
11. Measurement terminal for the errorsignal.
12. Adjustment screw for the output offset.
13. Three led indicator of the sense of deviation.
14. Coarse and fine adjustment of the proportional gain Kp, of the time of the integral action TI and of the time of the derivative action TD.
15. Indicator of overrange: led "over" on when the output voltage is higher than 10 V or lower than 10 V.
16. Input Ioff for resetting the I controller.