Oxygen Analyser

Oxygen Analyser

Product Details:


Product Description

Oxygen Analyser

The Oxygen Analyser measures oxygen concentrations from percentage levels to a fraction of parts per million (ppm) in clean gases. Packaged on a 19” rack mounting enclosure, it uses a oxygen sensor to provide accurate measurement with minimal interference from other gases. The unique cell and heater design gives very fast warm-up times, rapid response, and long sensor life.

Specification of Oxygen Analyser

1. Display


  • Multi-digit LCD, character height 12.7mm


2. Range


  • 0.1ppm to 100% oxygen, autoranging


3. Display resolution


  • From 10% to 100%: 0.1%
  • From 0.5% to 9.99%: 0.01%
  • From 500ppm to 4999ppm: 10ppm
  • From 50ppm to 499ppm: 1ppm
  • From 5ppm to 49.9ppm: 0.1ppm
  • From 0ppm to 4.99ppm: 0.01ppm


4. Accuracy


  • 100% to 100ppm: ±2% of reading or better
  • 99ppm to 10ppm: ±1ppm
  • 0.1ppm to 9/9ppm: ±0.2ppm


5. Stability


  • Better than 2% of reading or 0.5ppm/month, whichever is greater


6. Sample flow


  • Between 100 and 300ml/min for optimum operation
  • Speed of response in clean inert atmospheres
  • % levels: less than 0.5s for 90% change
  • Levels from 100 to 10ppm: less than 5s for 90% change
  • Levels less than 100ppm: less than 30s for 90% change
  • When the cell is stabilised/conditioned at low levels, response to changes at that level is of the order of 3 to 4s
  • Sample inlet pressure (no pump fitted)
  • 10mbar minimum
  • 8bar maximum
  • Sample temperature (at analyser)
  • 100°C maximum
  • Sampling system materials
  • Materials include: nickel, brass, aluminium, stainless steel, platinum, zirconia, alumina, PTFE and nitrile-rubber
  • Sample connection (located on back panel of unit)
  • Captive seal compression fitting suitable for 0.25inch (6mm) outside diameter tube


7. Analogue outputs


  • Standard: 0 to 5V
  • Optional: 4 to 20mA
  • Each user-programmable between 0 – 100% to 0 – 5ppm


8. Alarm outputs


  • 2 alarms: each user-configurable to OFF, HIGH or LOW status
  • Hysteresis programmable from 0 to 10% of set-point
  • Volt-free changeover relay contacts rated 48V ac or dc, 0.5A, normally-energised
  • Ambient temperature: 45°C maximum


9. Power supply: 110/120V, 50/60Hz at 80VA max, 220/240V, 50/60Hz at 80VA max

10. Mounting: 19” Rack-mounting enclosure 3U high and 270mm deep


* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.

DIDAC INTERNATIONAL All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.(Terms of Use)
Developed and Managed by Infocom Network Ltd.