Manual Batch Distillation Pilot Plant

Manual Batch Distillation Pilot Plant

Product Details:

X

Product Description

Manual Batch Distillation Pilot Plant

  • Distillation column height 600 mm with 7 bubble cap trays.
  • Re-boiler with 4 liters capacity complete with 1600 W electric heater.
  • Condenser with reflux head.
  • Tank for collection of distillate with 1 liter capacity.
  • Tube in tube heat exchangers manufactured from AISI 304 stainless steel
  • 6 thermocouples with  probes protected by stainless steel shield sleeves
  • 6 electronic temperature indicators
  • Pneumatic valve for controlling the condenser cooling water made of stainless steel
  • Residual pressure electronic transmitter made of stainless steel with a range of 0-1000 mbar and 4-20mA output signal.
  • Pneumatic valve for controlling the residual pressure made of stainless steel
  • Residual pressure electronic transmitter made of stainless steel with a range of 0-1000 mbar and 4-20mA output signal.
  • Pneumatic valve for controlling the residual pressure made of stainless steel
  • 2x electropneumatic converters 0.2 to 1.0 bar and 4-20mA signals
  • Thyristor unit for controlling the power to the re-boiler electric heater.
  • 2x programmable timers for the control of reflux ratio
  • Variable-area flow meter made of stainless steel with a  range 20 to 250 liters / hour and 4-20mA output signal
  • Oil vacuum pump with trap and flow rate of 4m3/hour
  • Vacuum gauge range 0 to –1 bar
  • Electrical control panel in main cabinet
  • Vacuum circuit with trap
  • Pipe work and valves manufactured from stainless steel.
  • Microprocessor digital PID controller with serial card.

DIDAC INTERNATIONAL

* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



DIDAC INTERNATIONAL All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.