Manual Absorption And Stripping Pilot Plant

Manual Absorption And Stripping Pilot Plant

Product Details:

X

Product Description

Manual Absorption and Stripping Pilot Plant

  • Column with a height of 1000 mm packed with Raschig rings
  • Heat exchanger with an exchange surface of 0.5 m2 installed at the bottom of the column
  • Feed tank with a capacity of 30 litres
  • Metering pump with a flow rate of 270 litres per hour including a pneumatic actuator that can be controlled by a signal of 0.2 to 1 bar
  • 2x pneumatic control valves Cv = 0.2 and 0.08
  • Electronic thermal mass flowmeter with a range of 0 to 600 litres per hour and electronic display for measuring the flow rate of the gas to be absorbed
  • Electronic thermal mass flowmeter with  a range of 0 to 6000  litres per hour and electronic display for measuring the flow rate of the carrier gas .
  • Electronic differential pressure transmitter with a range of 0 to 200 mm H2O and 4-20 mA output signal
  • 3x digital thermocouples with pt100 probes protected by stainless steel shield sleeves
  • 3x electronic temperature indicators
  • 3x pneumatic manual control valves
  • Pipework manufactured from stainless steel
  • Electrical control panel in main cabinet
  • Emergency stop button.

Power Supply

  • 400 Vac 50 Hz three-phase 1000 VA (Other voltages and frequencies available on request)

Automated Absorption And Stripping Pilot Plant      DICE048

 

 


DIDAC INTERNATIONAL

* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



DIDAC INTERNATIONAL All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.