Features
The fundamental Principle of the MagneticBending Machine is that it uses electromagnetic, rather than mechanical,clamping system. The machine consists of a long electromagnet with a steelclamp bar located above it. The sheet metal is clamped between the two by anelectromagnet capable of clamping with a force range of between 3-10 tons.Rotating the bending beam then forms the bend. The sheet is bent around thefront edge of the clamping bar. They have application in many ways with fourvarious sets clamping bars.
Technical Specification:
Model |
DIGR119 |
DIGR119/1 |
DIGR119/2 |
DIGR119/3 |
DIGR119/4 |
DIGR119/5 |
Max. Bending Capacity |
625 x 1.6mm |
1000 x 1.6mm |
1250 x 1.6mm |
2000 x 1.6mm |
2500 x 1.6mm |
3200 x 1.2mm |
Clamping Force |
3 Ton |
4.5 Ton |
6 Ton |
9 Ton |
12 Ton |
10 Ton |
Back Gauge |
390mm |
640mm |
640mm |
640mm |
640mm |
640mm |
Nominal Current |
4 Amp |
6 Amp |
6 Amp |
12 Amp |
15 Amp |
15 Amp |
Bending Edge Length |
670mm |
1050mm |
1300mm |
2090mm |
2590mm |
3290mm |
Distance Between Filters |
630mm |
1010mm |
1260mm |
2028mm |
2528mm |
3228mm |
Net Weight |
100Kgs. |
140Kgs. |
175Kgs. |
290Kgs. |
330Kgs. |
400Kgs. |
![]() |