Experimental Module Pin On Disc

Product Description

Experimental Module Pin on Disc       

Technical Description of Experimental Module Pin on Disc      

Using the experimental module, friction forces between a vertical pin and rotating disc can be investigated. The unit is intended for use with the basic module. The end of each pin specimen made of steel, aluminium or brass rubs against the rotating, hardened, ground steel disc. The contact pressure between the components can be varied using a lever with weights. The friction force is measured using a strain gauge force transducer in the bearing point of the loading mechanism. The disc is enclosed in an open container that can be filled with different lubricants for the experiments.

Specification of Experimental Module Pin on Disc

• Benchttop exp. module for the investigation of wear on pairs of friction materials with surface contact
• Operation in conjunction with module
• Stainless steel friction disc, hardened and ground
• Adjustable operating speed
• Pin material steel, aluminium, brass
• Friction pin diameter 4mm
• Friction force measuring using full bridge strain gauge

Technical Data of Experimental Module Pin on Disc

• Friction disc: stainless steel, hardened, ground
• Operating speed: 0...0.42m/s
• Friction pin diameter: 4mm
• Load: 0...80N
• Friction force measuring range: 0...50N

Dimensions and Weight of Experimental Module Pin on Disc

• l x w x h : 350 x 440 x 230 mm
• Weight: approx. 8 kg