Experimental Flume 309x450mm And 409x500mm

Product Description

Experimental Flume 309x450mm The experimental flume with a closed water circuit has a cross-section of 309x450mm. The length of the experimental section is between 5m and with further extension elements a maximum of 12,5m. The side walls of the experimental section are made of tempered glass, which allows excellent observation of the experiments. All components that come into contact with water are made of corrosion-resistant materials. The inlet element is designed so that the flow enters the experimental section with very little turbulence. Learning objectives/experiments Together with optionally available modelsUniform and non-uniform dischargeFlow formulaeFlow Transition (Hydraulic Jump)Energy dissipation (hydraulic jump, stilling basin)Flow over control structuresWeirs (sharp-crested, broad-crested, ogee-crested)Discharge under gatesFlow-measuring flumesLocal losses due to obstaclesTransient flow: wavesVibrating pilesSediment transportSpecificationBasic principles of open-channel flowExperimental flume with experimental section, inlet and outlet element and closed water circuitLength of the experimental section 5m, up to 12,5m possible with additional extension elementsSmoothly adjustable inclination of the experimental sectionExperimental section with 20 evenly spaced threaded holes on the bottom for installing models or for water level measurement using pressureSide walls of the experimental section are made of tempered glass for excellent observation of the experimentsExperimental section with guide rails for the optionally available instrument carrierAll surfaces in contact with water are made of corrosion-resistant materialsFlow-optimised inlet element for low-turbulence entry into the experimental sectionClosed water circuit with 2 water tanks, pump and flow control