Send Inquiry
Send SMS
Call Me Free
Creep and Stress Rupture Testing Machine Under High Temperature

Creep and Stress Rupture Testing Machine Under High Temperature

50000.00 - 500000.00 INR/Pack

Product Details:


Price And Quantity

  • 1 , , Pack
  • 50000.00 - 500000.00 INR/Pack

Trade Information

  • 10 , , Pack Per Month
  • 10-30 Days

Product Description

The Lever Arm Creep and Stress Rupture Testing Machine Under High Temperature

  • Remote communication control function saves your operators invigilation during testing process; alarm message can be transmitted to your mobile phone to inform you test situation by equipping with special dial number device.
  • The lever arm Creep and Stress Rupture machines are an economical alternative to traditional electro-mechanical or hydraulically loading universal testing machines which have higher initial purchase prices and greater long term operating costs. This model may be configured for either room temperature or elevated temperature operation. A variety of temperature rated test fixtures and extension measurement device for the measurement of elongation on creep test applications are also available.
  • Motorized draw-head assembly automatically compensates for specimen elongation and keeps loading bar with excellent load accuracy of +/- 0.5% guaranteed.
  • The lever arm type machine has been specifically designed for long-time Creep and Stress Rupture test applications that involve maintaining constant loads for extended periods of time.  
  • Through the mechanical advantage of the lever arm loading system, constant loads may be maintained with a high degree of accuracy for long durations, using dead weights, without the continuous operation and dependency of a mechanically powered drive.
  • Both room temperature and elevated temperature systems are available
  • Furnace and chambers available with temperature ranges from 200C to 1100Cin common air environments
  • Numerous high temperature pull rods, specimen holders, furnace systems and extensometers available for creep and stress Relaxation applications. Many of which are also adaptable to hot tensile testing applications on universal testing machines.
  • Control system owns the three closed control function as load control, extension control, and velocity control. High precise control and accurate load with load measurement resolution reach 1/300000; the loading testing curve can be plotted automatically.

Technical Specifications



Force range (kN)


Calibration accuracy

class 0.5/1

Force accuracy

Force: 2%-5%FS: 1% of reading

Force>5%FS: 0.5% of reading

Force fluctuation

Force: 2%-5%FS: 1% of reading

Force>5%FS: 0.5% of reading

Force resolution (minimum weight set)


Lever arm ratio


Lever automatic leveling range


Lower pull rod travel


Lower pull rod speed

Slow speed (automatic leveling) 2.5mm/min

Fast speed           50 mm/min

Leveling motor power




Furnace type

Three-zone, open

Temperature range


Uniform temperature zone


Inside dimension


Outside dimension


Heating power


Temperature fluctuation

300~600C: 2C

600~900C: 3C

900~1100C: 4C



Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Creep Testing Machine' category

DIDAC INTERNATIONAL All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.