Continuous And Indeterminate Beams Apparatus

Product Description

Description of Continuous and Indeterminate Beams Apparatus Three piers measure vertical reaction forces with their integral load cell which connect directly to the Interface. Each pier caters for simply supported, or Continuous and Indeterminate Beams Apparatus and their beam attachments allow for rotation but no vertical movement during testing. Sinking supports can be studied due to the fact that each reaction pier has a height adjustment system and integral dial gauge attached. Continuous and Indeterminate Beams Apparatus a fourth pier clamps a cantilever or the fixed end of a beam. A double pulley assembly provides vertical loading of the beam. Point loads and uniformly distributed loads can be applied to the beams using the set of calibrated weights and hangers supplied. Experimental Capabilities of Continuous and Indeterminate Beams Apparatus Study of the general formula for beam deflections in bending in the form y= c. WL3 / EIVerification of the effect of changing the length of the beamsStudy the way the constant c is affected by the type and position of the loadThe principle of superpositionIndeterminate BeamsCantilevers and Propped CantileverSingle Point Loading and Uniformly Distributed LoadsContinuous BeamsTo compare the measured and theoretical valuesSinking Supports Specification of Continuous and Indeterminate Beams Apparatus To consist of three movable reaction supports, three test beams, load hangers, calibrated test weightsBeam deflection to be measured using a deflection indicatorTo have multiple load positionsReactions and deflections monitored using InterfaceMust be used with universal Frame and Stand Must be used with InterfaceComprehensive instruction manual provided