- Dynamic display of load, displacement, deformation and real-time testing curve on the screen.
- Closed loop control of channels such as load, displacement, deformation, etc. Smooth switching inbetween.
- Loading speed stepless setting, loading process stability, no jump to change fluctuations
- Total load force points set arbitrarily, holding time of load force point set arbitrarily
- Load force is precise controls, and steady loads.
- Strength point force value control precision, load without overshoot.
- Support saving, instant retrieving and inspection of testing results.
- Integrated with software limit protection, hardware travel limit protection and full scale overload protection.
- Max loading: 2000N
- Load measurement range: 1%~100%F.S.
- Load measurement accuracy: ±0.5%
- Load resolution:± 250000 no stepping, no change in full scale
- Deformation measurement range: 0~20mm
- Deformation measurement accuracy:±0.5%
- Deformation resolution: 0.001mm
- Loading head measurement accuracy: ±0.5%
- Displacement display resolution: 0.001mm
- Displacement control resolution: 0.00002mm
- Tensile speed range: 0.01~500mm/min
- Tensile speed accuracy: 0.5%
- Load hold accuracy: 0.5%
- Load hold time: set arbitrarily, but at least 3 hours
- Optical cable tensile length: 25m
- Loading head tensile travel: 500mm
- The diameter of chuck and guide wheel: 250mm
- Loading drive system: Japan NO.1 servo system YASKAWA
- Power: 600W/AC220V/50Hz